Optional chaff attention problems
kind：Industries NEWS | time：2014-08-13 17:25:00 | hits：91
Chaff optional note issues:
1, chaff cutter safety device checks are complete and effective. All rotating parts must be installed chaff cutter shield; feed inlet distance from the axis of the tool axis must meet the following requirements: productivity is less than 0.4 tons / hour of not less than three times the width of the feed inlet; productivity of more than 0.4 tons / hour of not less than 450 mm, and must be provided with a clutch means; productivity greater than 2.5 t / h of the automatic feed device and the overload protection device must be installed. Bearing, knife bolts must be used in high-strength bolts, and there should be added locking devices (such as spring washers, etc.). Chaff does not meet the above requirements, the use of personal safety accident prone, not to buy.
2, check the appearance of quality and assembly quality. Chaff seam welded parts should be uniform and smooth, no burn, weld phenomenon; chaff cutter shaft when the clutch should turn flexible cable wiring; various parts of the shield should have a certain strength.
keywords：
attention problems
